Friday, October 7, 2022
No menu items!
HomeHealth & FitnessThe New Drop Sets for Size & Strength - Bigger Stronger Leaner...

The New Drop Sets for Size & Strength – Bigger Stronger Leaner – Forums


Get Huge, Save Time

Drop sets work great, but there’s a way to make them work even better: strength zone training. Bonus: This method is a timer saver, too.

Get Big, Save Time: A Smarter Way to Do Drop Sets

Drop sets are an advanced training technique where you extend a set by decreasing the weight. While research suggests they’re equivalent to regular sets for gaining size, drop sets are more efficient because they involve spending much less time in the gym (1). To do a traditional drop-set, you’d take an exercise to failure, descease the weight, and immediately do more reps until you reach failure again.

But I’m about to show you how to level up your drop sets so that you’re not only changing the weight, you’re also changing the angle of the exercise. This means you’ll hit both strength zones, challenging muscles in the lengthened and shortened ranges of motion. “What’s a strength zone?” We’ll get into that below.

Why care, though? Because higher-volume, bodybuilding-style workouts are often packed with redundant exercises, which is an inefficient use of time. But this type of drop set is hyper-efficient. It’ll make a difference in your physique and the time you spend working out.

But First, What’s a Strength Zone?

But First, What’s a Strength Zone?

Every type of strength exercise is most difficult at a certain part of the range of motion (ROM). Anatomically, the target muscles work the hardest at a certain joint angle.

There are two general categories of strength exercises based on what ROM they target. Let’s call them strength zones:

  • The Lengthened-to-Midrange Power Zone: These workouts make muscle mass work hardest from the stretched (or lengthened) place by the center of the vary of movement.
  • The Shortened-to-Midrange Power Zone: These workouts make muscle mass work hardest through the contracted (or shortened) place by the center of the vary of movement.

Analysis exhibits that after we raise, the features we make are particular to the joint positions educated (2,3,4). As an instance, let’s examine two frequent shoulder workouts: the rear-delt flye and the side-lying rear-delt flye:

  • The normal rear-delt flye is most troublesome when the arm is out to the aspect of your torso, which is when your rear delt is within the shortened place. It strengthens your rear deltoids of their shortened-to-midrange power zone.
  • It’s reversed with the side-lying variation. It trains the lengthened-to-midrange power zone. It’s hardest when your arm is straight in entrance of the torso and the rear delt is extra lengthened. It’s best when your arm is out to the aspect of the torso or above you, and the muscle is shortened.

With out the power zone body of reference, it could be straightforward to assume that these two workouts are interchangeable. In any case, they’re each rear-delt isolation actions. However you want each for full power of your rear delts as a result of every strengthens completely different elements of the ROM and ensures you possess full anatomical vary of movement power by horizontal shoulder abduction (shifting your arms from in to out).

After all, this is applicable to each muscle in your physique, which is why my ebook, Strength Zone Training, isn’t nearly serving to you to construct muscle. It’s your exercise blueprint for constructing muscle with a goal.

The 6 Finest Drop Units for Higher-Physique

The 6 Best Drop Sets for Upper-Body

Fun fact: Muscles are weaker when they’re fully shortened (contracted), which is a principle of muscle physiology known as the length-tension relationship or the length-tension curve.

That’s why the first exercise in each of these drop sets will start with the exercise that hits the mid-to-shortened range strength zone. You start the set in your weaker (harder) position when you’re fresh. You finish in your stronger position, which better accommodates for your fatigue. This will allow you to crank out more highly-quality reps.

1. Two-Point Cable Rear-Delt Flye

2. Two-Point Cable Pec Flye

3. Two-Point Cable Pec Flye

4. Lateral Raise

5. Rope Triceps Extension

6. Cable One-Arm Biceps Curl

Directions

1. TWO-POINT CABLE REAR-DELT FLYE

During any style of rear-delt flye, the most mechanical tension on the muscles is when your arm is at a 90-degree angle with the line of force because this is when the lever arm is at its longest.

Face the cable to maximize the strength and development of your posterior deltoids in the shortened-to-midrange strength zone. The cable forms a 90-degree angle to your arm when it’s out to your side.

Stand parallel to the cable to maximize the development of your rear delts in the lengthened-to-midrange strength zone. The cable forms roughly a 90-degree angle to your arm when your arm is in front of your torso.

2. TWO-POINT CABLE PEC FLYE

Stand parallel to the cable to maximize the strength of your pecs in the shortened-to-midrange strength zone. The cable forms roughly a 90-degree angle to your arm when it’s in front of your torso.

Face away from the cable to maximize the strength of your pecs in the lengthened-to-midrange strength zone. The cable forms roughly a 90-degree angle to your arm when your arm is out to your side.

3. STRAIGHT-ARM PULLDOWN

The most mechanical tension on your lats during straight-arm pulldowns is when your arms are at a 90-degree angle with the cable as a result of that is when the lever arm is at its longest.

With the cable anchored above you, hold your torso upright to maximise the power of your lats within the shortened-to-midrange power zone. You’ll discover the cable kinds roughly a 90-degree angle to your arms once they’re nearer to your sides.

Stand together with your torso leaning ahead roughly parallel to the bottom to maximise the event of your lats within the lengthened-to-midrange power zone. You’ll discover the cable kinds roughly a 90-degree angle to your arms once they’re nearer to being above your head.

4. LATERAL RAISE

During any style of side shoulder raise, the most mechanical tension on the muscles is when your arm is at a 90-degree angle with the line of force. This is when the lever arm is at its longest.

The dumbbell leaning lateral raise maximizes the strength of your middle (lateral) delts in the shortened-to-midrange strength zone. Here, your arm is parallel to the floor when your shoulder is abducted just above your shoulder.

For the cable lateral raise, anchor the cable at mid-thigh level. This will maximize the development of your middle deltoids in the lengthened-to-midrange strength zone. Here, your arm forms a 90-degree angle to the cable when your arm is by down by your side.

5. ROPE TRICEPS EXTENSION

During any style of triceps extension, the most mechanical tension on the triceps is when your forearm is at a 90-degree angle with the line of force because this is when the lever arm is at its longest.

The rope triceps extension maximizes the strength of your triceps in the shortened-to-midrange strength zone. This is when the cable is perpendicular to your forearm when your elbows are fairly straight.

The rope-behind-the-head triceps extension maximizes the strength and development of your triceps in the lengthened-to-midrange strength zone. This is when the cable is perpendicular to your forearm when your elbows are bent around 90 degrees.

6. CABLE ONE-ARM BICEPS CURL

The cable curl maximizes the development of your biceps in the shortened-to-midrange strength zone because the cable is perpendicular to your forearm when your elbow is bent beyond 90 degrees.

The cable face-away curl maximizes the development of your biceps in the lengthened-to-midrange strength zone because the cable is perpendicular to your forearm when your elbow is fairly straight.

How Many Sets and Reps?

How Many Sets and Reps?

  • For each of these drop sets, do 2 to 3 sets with 2 to 3 minutes rest between sets.
  • For both the first and second parts of each drop set, do 8-12 reps and hit failure.
  • Begin the drop set by using a load that’s light enough to allow you to achieve a minimum of 8 reps in good form while being heavy enough that you can’t perform more than 12 reps.
  • For the second portion of each drop set, lower the load so it once again allows you to hit a minimum of 8 reps, but no more than 12, before reaching failure.
References

References

  1. Iversen VM et al. No Time to Lift? Designing Time-Efficient Training Programs for Strength and Hypertrophy: A Narrative Review. Sports Med. 2021 Oct;51(10):2079-2095. PubMed.
  2. Ebersole KT et al. Mechanomyographic and electromyographic responses to unilateral isometric coaching. J Power Cond Res. 2002 Could;16(2):192-201. PubMed.
  3. Folland JP et al. Power coaching: isometric coaching at a spread of joint angles versus dynamic coaching. J Sports activities Sci. 2005 Aug;23(8):817-24. PubMed.
  4. Kitai TA et al. Specificity of joint angle in isometric coaching. Eur J Appl Physiol Occup Physiol. 1989;58(7):744-8. PubMed.

T Nation earns from qualifying purchases as an Amazon Affiliate. Read more about our coverage.



Download App

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

Recent Comments